Cut & Strip Family E300
Cut and strip machine for simple applications
Overview
The Cut & Strip Family E300 cut and strip machine impresses with high performance, optimized operability and outstanding process reliability. It processes wires, tubing, ribbon and multiconductor cables as well as insulation such as PVC, PUR or Teflon in high-precision quality. Standard applications include the stripping of the outer jacket in several steps, as well as full and partial strips – also on both sides – with conductor cross sections from 0.05 to 10 mm² (36 to 8 AWG) and cable diameters from 0.3 mm to 8.0 mm (0.012" to 0.31"). Different belt materials and the included short piece kit allow a wide range of applications.
Blades and guides of the predecessor model EcoStrip 9380 are compatible.
The contact pressure on the feeding unit is programmable. This allows for very fine and targeted adjustments. The E300 is equipped with a two-in-one quick-change feeding unit suitable for roller drives, including a short piece kit for the processing of short cables. On the E300, changing the feeding unit to the short piece kit is software assisted. The gripping axis is programmable and ensures accurate transport of the cable.
The intuitive interface of the S.Drive software facilitates the creation of jobs and article programs, and increases overall performance. Predefined and verified default parameters support quick creation of processing jobs.
Application Range
Material
- Flat Ribbon Cable
- Wire
- Solid Wire
- Single Wire
- Flat Cable
- Rubber
- Cable
- Discrete Wire
- Stranded Wire
- Wire with Special Isolation
- PUR
- PVC
- Tubes + Pipes
- Teflon®
- Jacketed Flat Cable
Processing Capabilities
Technical Data
| Raw Material Diameter | 0.3 mm to 8.0 mm (0.012” to 0.31") |
| Conductor Cross Section – Stranded Wire | 0.05 mm2 to 10 mm2 (36 to 8 AWG) |
| Conductor Cross Section – Solid Wire | 0.05 mm2 to 1.5 mm2 (36 to 16 AWG) |
| Raw Material Length | Min. 48 mm (1.89"), max. 1,000,000 mm (39,370") |
| Raw Material Length with Short Piece Kit | Min. 18 mm (0.70"), max. 1,000,000 mm (39,370") |
| Pull-Off Length | Left side: min. 0.1 mm (0.004“) – max. 46 mm (1.18“) Right side: min. 0.1 mm (0.004") – max. 152 mm (5.98") |
| Number of Blade Sets with Blade Width | 1 x 12 mm (1 x 0.47“) |
| Interfaces | USB-A, USB-C, SMI (D-Sub 15-pin), Ethernet, ESC (Emergency Stop Circuit) |
| Supply | 100 – 240 VAC, 50/60 Hz |
| Compressed Air Connection | 6 bar |
| Dimensions (L x W x H) | 436 x 510 x 298 mm (17.16 x 20.07 x 11.73“) without stand-alone monitor |
| Weight | 34 kg (75 Ibs) |
| Declaration of Conformity | The E300 fully complies with the CE and EMC machinery directives relating to mechanical and electrical safety and electromagnetic compatibility, as well as UKCA, UL, and CSA |
| Important Note | We recommend to have cable sampled by us in case of doubt. |
More Info
Basic equipment
- 10" color touchscreen
- LED light
- Air Jet unit
- Set of V-shaped blades
- Swivel guides: inner diameter 2, 4, 6, 8, 10 mm
- 2 steel rollers and baffle for short piece kit
Options
- Cable jam detector
- Various radius blade sets
- Toolbar with magnetic holder for accessories
