SemiRigid 1050
Semi-Rigid Coaxial Cable Stripping Machine
Overview
Programmable stripping machine for semi-rigid coaxial cables up to 4.50 mm (0.177”) outer diameter and strip lengths up to 30 mm (1.18”).
- High precision, field proven mechanics based on the previous model SemiRigid 1000
- User-friendly high resolution 7” color touchscreen
- Intuitive and easy programming thanks to the excellent menu navigation and predefined cable stripping templates
- Helpful wizards for machine setup and maintenance
- Appealing design and ergonomics
Application Range
Semi-rigid coaxial cables from 0.86 (0.034”) up to 4.50 mm (0.177”) outer diameter and strip lengths from 0.10 (0.004”) up to 30 mm (1.18”).
Processing Capabilities
Technical Data
| Raw Material Diameter | Max. 4.50 mm (0.177“) |
| Strip Length | Maximum 30 mm (1.18“) |
| Increment | Length: 0.01 mm (0.00039“) steps |
| Blade | For turning and removing: 2 pcs. |
| Cycle Rate | > 3 s, (depending upon cable type and programming) |
| Memory Capacity | 1,000 cables |
| Interfaces | 2x USB "Host", Footpedal, Ethernet (on request) |
| Noise Level | < 70 db (A) |
| Power Supply | 100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz |
| Compressed Air Connection | 6 bar / 0.6 MPa / 87 psi |
| Dimensions (L x W x H) | 566 x 215 x 252 mm (22.3 x 8.5 x 9.9“) |
| Weight | Net 19.5 kg (43 lbs) |
| CE-Conformity | The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |
